Commercial · Wellington, FL
Prime Pool Builders Wellington has served Wellington since 2016, delivering commercial splash pad construction for parks, HOAs, schools, and hospitality properties. We design and build recirculating or flow-through splash pad systems with code-focused layouts, durable surfacing, and service-friendly equipment rooms.
Good splash pad performance starts below the surface. We begin with demolition and grading, then install compacted base material (typically 6-12 inches of DOT-grade limestone or equivalent) with proof-rolling to catch soft spots. Plumbing and conduit runs are trenched to engineered depths, pressure-tested, and sleeved where they cross slab joints. After forms, reinforcement (rebar mat or fiber-reinforced concrete as specified), and bonding/grounding points are set, we pour a properly sloped concrete slab to move water toward collection drains and access points.
In South Florida conditions, heat, heavy rain, and sandy soils demand the right drainage and finish. We set area drains, trench drains, and collection sumps with cleanouts, then tie them to a recirculation tank or approved discharge per plan. For the play surface, we install commercial-grade splash pad finishes such as broom-finish concrete with additives, spray-applied textured coatings, or poured-in-place rubber surfacing over the structural slab where specified. Expansion joints are laid out to control cracking, edges are finished for ADA-friendly transitions, and water features are anchored to resist movement and corrosion.
Wellington property managers choose us because we build splash pad systems that are easier to operate and cheaper to maintain. Our layouts prioritize clear service access to valves, strainers, filters, and chemical systems, and we label plumbing, valves, and electrical circuits for faster troubleshooting. We coordinate submittals and inspections, follow manufacturer installation requirements for spray features and control panels, and keep job sites organized to reduce disruption for residents, students, and guests. When the project calls for it, we phase work to keep adjacent amenities open and maintain safe pedestrian routes.
Before turnover, we walk the site with your team and verify flow rates, nozzle performance, and drainage under real operating conditions. You get start-up support, controller programming, and a clear orientation on daily checks, winterizing (if applicable), and routine maintenance intervals for filters, pumps, and UV or chemical feed systems. We provide closeout documentation such as equipment cut sheets, as-built notes, and a punch-list signoff so your staff and inspectors have what they need. The result is a commercial splash pad that looks clean, runs predictably, and stays safe for kids and caregivers.
We build splash pads with the equipment you expect on a commercial site: VFD-capable pumps, cartridge or sand filtration, stainless steel manifolds, solenoid valves, and automated controls with timed sequencing and push-button activation. Recirculating systems can include balance tanks, make-up water, backwash handling, and UV sanitation to reduce chloramine odor and improve water quality. If your plan requires a mechanical room, we set pads, housekeeping, ventilation clearances, and service lighting so maintenance is straightforward. Every decision is aimed at stable pressure, consistent spray patterns, and reduced nuisance shutdowns.
Yes. We provide a free written estimate after an on-site evaluation to confirm access, elevations, utilities, and scope.
Timelines vary by design, permitting, weather, and material lead times, but most gunite pool builds run several weeks from excavation through plaster and start-up. We provide a schedule outline with your estimate.
Often, yes. If the shell is structurally sound, a remodel may include resurfacing, tile and coping, deck repairs, new skimmers and returns, and a full equipment upgrade.
We coordinate permitting and inspection steps required for pool construction, including electrical and barrier-related items, based on the project scope.
We build custom shapes and practical features like spas, sun shelves, benches, LED lights, water features, and automation-controlled systems, based on your layout, setbacks, and budget.
A well-built splash pad needs more than fun features, it needs correct drainage, reliable hydraulics, and a surface that stays slip-resistant under constant water. Prime Pool Builders Wellington provides commercial splash pad construction for HOAs, parks, schools, daycares, fitness clubs, and hotels, with an emphasis on serviceable equipment layouts and code-focused site planning. Choose a recirculating system when you want better water control and lower long-term operating waste, or a flow-through design when your site and utility plan support it.
Our process starts with site evaluation, utility coordination, and a feature layout that balances play value with safety and supervision lines. We install underground plumbing with pressure testing, backflow prevention as required, and electrical conduits for controllers, solenoids, and lighting. Mechanical systems can include pumps, filtration, chemical feed or UV sanitation, flow meters, and strainers, selected to match your spray feature counts and target flow rates. We also plan accessible shutoffs, cleanouts, and drainage so the pad clears water quickly after use.
Surface and detail work matter on a commercial splash pad. We pour and finish concrete to maintain consistent slope to drains, then apply specified coatings or rubber surfacing systems designed for wet traction and UV exposure. Anchoring, bonding, and corrosion-resistant fasteners help features stay secure, and expansion joints are placed to reduce random cracking. If your facility needs a perimeter curb, seat wall, or shade footings, we coordinate those elements so the entire amenity functions as one system.
At turnover, we test spray patterns, confirm drainage performance, and verify controller programming and safety shutoffs. You receive a clear operating orientation and closeout package with equipment information and maintenance guidance so your team can keep the splash pad running smoothly through peak season. If you are planning a new build or replacing an aging pad, we can provide a free written estimate and a practical scope that matches your budget, timeline, and inspection requirements.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Wellington. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
